Studio image of a 444 P-Tier Backhoe from a front left view

444 P-Tier

The 444 P‑Tier Mid‑Size Wheel Loader is built to show up and get to work, delivering the power operators need, all‑day comfort, and attachment versatility to take on a wide range of jobs, with a rugged, easy‑to‑run design crews can rely on day after day.

Key Features:
  • Net Power: 92 kW (124 hp) at 2,100 rpm
  • Operating Weight: 11 709 kg (25,814 lb.)
  • Bucket Capacity: 1.9–3.4 m³ (2.5–4.5 cu. yd.)
  • Height to Top of Cab 10 ft, 6 in. (3.19 m)
Electrohydraulic (EH) Controls
Interior view of wheel loader cab showing a steering wheel and a control joystick with orange buttons mounted on a black base

Electrohydraulic (EH) controls provide enhanced functionality, allowing operators to customize machine operations. This includes soft hydraulic stops and programmable joystick buttons. These features empower operators with increased productivity across various jobsite tasks.

Payload Weighing Systems
A front-end loader sits on a dirt construction site under a clear blue sky, holding a full bucket of soil raised slightly off the ground.

SmartWeigh delivers dynamic weighing without slowing down the job—no workflow interruption or boom reset needed. Easily viewed on the onboard monitor and integrated with the John Deere Operations Center, it’s available as a factory or field‑installed option.

Vision and Detection Systems
Interior view of a heavy construction vehicle cab showing an operator seated at the controls, wearing a hard hat and a high-visibility safety vest

Active jobsites present many operational challenges, including multiple machines, crew members, and bystanders. The John Deere Advanced Vision System (AVS) and SmartDetectâ„¢ can help enhance operator awareness to confidently navigate busy work areas.

Description: 444 P-Tier
Key Specs
Net Peak Power2100 rpm
Net Peak Power At Rated RPM (ISO 9249)124 hp
Net Peak Torque1400 rpm
Net Peak Torque At Rated RPM (ISO 9249)392 lb-ft
Engine
ManufacturerJohn Deere
ModelPowerTechâ„¢ PSS 4045
Non-Road Emission StandardsEPA Final Tier 4/EU Stage V
Cylinders4
Valves Per Cylinder4
Displacement276 cu in.
Net Peak Power2100 rpm
Net Peak Power At Rated RPM (ISO 9249)124 hp
Gross Peak Power1800 rpm
Gross Peak Power At Rated RPM (ISO 9249)138 hp
Net Peak Torque1400 rpm
Net Peak Torque At Rated RPM (ISO 9249)392 lb-ft
Gross Peak Torque1400 rpm
Gross Peak Torque At Rated RPM (ISO 9249)405 lb-ft
Net Torque Rise34 %
Fuel System (Electronically Controlled)High-Pressure common rail
LubricationFull-flow spin-on filter and integral cooler
AspirationTurbocharged, charge air cooled
Air CleanerUnder-hood, dual-element dry type, restriction indicator in cab monitor for service
Cooling
Fan Drive TypeHydraulically Driven, Proportionally Controlled, Fan Aft of Coolers
Electrical And Lighting
System Type24 volt with 100-amp alternator (140 amp alternator optional)
Battery Voltage12 V
Number Of Batteries2
Battery Capacity Per Each950 CCA
Standard Alternator Rating100 amp
Optional Alternator Rating140 amp
Transmission System
TypeCountershaft-type PowerShiftâ„¢
Torque ConverterSingle-stage, single-phase
Shift ControlElectronically modulated, adaptive, load and speed dependent
Operator InterfaceSteering-column or joystick-mounted F-N-R and gear-select lever; kick-down button on hydraulic lever
Shift ModesManual/auto (1st-D or 2nd-D); Quick shift button with 2 selectable modes: kick-down or kick-up/down; and 4 clutch cutoff setting
Maximum Forward Travel Speeds (Standard 5-Speed With Lockup Torque Converter)
Tire Size Used To Measure Travel Speeds17.5R25
Range 14.6 mph
Range 27.6 mph
Range 314.5 mph
Range 421.9 mph
Axles And Brakes
Final DrivesHeavy-duty mid-board planetary
Standard Differentials FrontHydraulic locking
Standard Differentials RearConventional
Optional Differentials FrontDual locking
Optional Differentials RearDual locking
Tire Size Used To Measure Oscillation17.5 R 25
Rear Axle Oscillation, Stop To Stop, With 17.5 R 25 Tires24 degrees
Rear Axle Oscillation, Distance Each Direction12 degrees
Service Brakes (ISO 3450)Outboard, forced oil cooled, multi disc
Parking Brake (ISO 3450)Automatic spring applied, hydraulically released, driveline mounted, sealed wet multi disc
Wheels And Tires
Tire Size Used To MeasureMichelin 17.5 R 25, 1 Star L-3
Tread Width On Standard Tires74.8 in.
Width Over Tires On Standard Tires95.1 in.
Serviceability
Fuel Tank (With Lockable Cap) Refill Capacity60 gal.
Cooling System Refill Capacity25 qt
Diesel-Exhaust Fluid (DEF) Refill Capacity16.5 qt
Engine Oil With Vertical Spin-On Filter Refill Capacity15.3 qt
Transmission Reservoir With Vertical Filter Refill Capacity19.5 gal.
Axle Oil Without Coolers (Front And Rear, Each) Refill Capacity23 gal.
Hydraulic Reservoir With Filter Refill Capacity21.7 gal.
Parking Brake Oil (Wet Disc) Refill Capacity12 oz.
Hydraulic System And Steering
Pump Type And System (Loader And Steering)Variable-displacement, axial-piston pump; closed-center, pressure-compensating system
Rated RPM2350 rpm
System Pressure At Max Rated Flow1000 psi
Max Rated Flow At Rated RPM36 gpm
System Relief Pressure (Loader And Steering)3600 psi
Loader ControlsTwo-function valve; joystick control or fingertip controls; hydraulic function enable/disable; optional third with roller or auxiliary lever and fourth function valve with dual roller
Steering Type (ISO 5010)Power, fully hydraulic
Steering Articulation Full Arc Angle80 degrees
Steering Articulation Angle Each Direction40 degrees
Turning Radius (Measured To Centerline Of Outside Tire)15.58 ft, in.
Hydraulic Raise Cycle Time5.8 seconds
Hydraulic Dump Cycle Time1.4 seconds
Hydraulic Lower (Power Down) Cycle Time4 seconds
Hydraulic Total Cycle Time11.2 seconds

Get A Quote