John Deere Product Details
700 P-Tier
Vision Systems
To enhance awareness for confident navigation of busy work areas, optional rearview (backup) camera helps the operator see what’s behind the dozer on the in-cab monitor. Optional Advanced Vision System (AVS) includes two digital cameras mounted on the exterior left and right cab-light brackets plus an additional camera mounted to the front grille that integrate with the rearview (backup) camera for a single display on a dedicated in-cab monitor.
Grade Control Solutions
John Deere precision construction technology enables operators to make accurate grading passes while significantly reducing re-work. The best part, our machine technology can be upgraded at any time, from entry level to advanced, now you have the flexibility to upgrade when the time is right.
Make Long Days Feel Shorter
P-Tier dozers provide a quiet, comfortable ride with precise control, and convenience that is even better than previous John Deere cabs. Operators will appreciate improved visibility with clear sight lines to the blade corners, and all new touch screen displays
Primary Engine Option
| Manufacturer | John Deere |
| Model | PowerTechâ„¢ PVS 6068 |
| Non-Road Emission Standards | EPA Final Tier 4/EU Stage V |
| Displacement | 414 cu in. |
| Aspiration | Turbocharged with charge-air cooler |
| Air Cleaner | Dual-stage dry tube with tangential unloader |
Cooling
| Fan Type | Variable-speed suction fan with optional reversing feature |
| Engine Coolant Rating | -34 °F |
| Engine Radiator Fins per Inch | 10 |
Powertrain
| Transmission Type | Hydrostatic |
| System Relief Pressure | 6900 psi |
| Forward Travel Speed | 5.5 mph |
| Reverse Travel Speed | 5.5 mph |
| Final Drives Type | Triple Reduction |
| Total Ratio | 33.59-1 |
| Maximum Drawbar Pull | 45050 lb. |
| Drawbar Pull at 1.2 mph | 29500 lb. |
| Drawbar Pull at 1.9 km/h | 131 kN |
| Drawbar Pull at 2.0 mph | 18600 lb. |
| Drawbar Pull at 3.2 km/h | 83 kN |
Primary Undercarriage
| Track Gauge | 78 in. |
| Chain | Sealed and lubricated |
| Shoes, Each Side | 39 |
| Track Rollers, Each Side | 7 |
| Track Length on Ground | 103 in. |
| Ground Contact Area | 6851 sq in. |
| Ground Pressure | 4.66 psi |
| Oscillation at Front Roller | Yes |
Hydraulics
| Type | Open-center hydraulic system with fixed-displacement gear pump |
| Pump Capacity (High Flow) | 25 gpm |
| System Relief Pressure | 3200 psi |
| Maximum Flow at Unloaded High Idle | 25 gpm |
| Control | 3-function electrohydraulic (EH) joystick with proportional roller-angle function |
Electrical And Lighting
| Voltage | 24 V |
| Battery Capacity | 950 CCA |
| Reserve Capacity | 175 min. |
| Cab Alternator Rating | 145 amp |
| Canopy Alternator Rating | 110 amp |
| Light-Emitting Diode (LED) Lights | Cab-mounted front (2) and cab-mounted rear (2) |
| Premium Light-Emitting Diode (LED) Lights | Cab-mounted front (4) and cab-mounted rear (4) |
Serviceability
| Fuel Tank Capacity with Lockable Cap | 69.2 gal. |
| Hydraulic Reservoir and Filter Capacity | 26.9 qt |
Operating Weights
| Base Weight | 31943 lb. |
Machine Dimensions
| Blade Type | Power-Angle-Tilt (PAT) |
| Overall Height with Antennas | 120 in. |
| Overall Height with Limb Risers | 124 in. |
| Tread Depth with Single-Bar Grouser | 2.2 in. |
| Ground Clearance in Dirt | 15.2 in. |
| Overall Length | 193 in. |
| Overall Length with Extended Drawbar | 200 in. |
| Overall Length with Extended Drawbar and Rear Counterweight | 205 in. |
| Overall Length with Winch and Fairlead Rollers | 216 in. |
| Blade Lift Height | 38 in. |
| Blade Digging Depth | 21 in. |
| Blade Cutting Edge Angle, Adjustable | 51.2 degree (angle) |
Rear Ripper
| Rear Ripper Type | Multi-shank parallelogram ripper with 5 pockets and 3 shanks |
| Weight | 3183 lb. |
| Maximum Penetration | 22 in. |
| Maximum Clearance Under Tip | 23 in. |
| Overall Length, Lowered Position | 59 in. |
| Overall Length, Raised Position | 48 in. |
| Overall Beam Width | 76 in. |
| Slope Angle (Full Raise) | 26 degree (angle) |
| Ripping Width | 66 in. |
| Distance Between Shanks | 32 in. |
| Winch Length | 31 in. |
