310 P-Tier Articulated Dump Truck front left angle

310 P-Tier

The John Deere 310 P-Tier Articulated Dump Truck combines power and precision, making it an essential asset for any demanding construction site.

Key Features:
  • Net Power: 264 kW (354 hp) at 1,900 rpm
  • Rated Payload: 28 125 kg (62,005 lb.)
  • Heaped Capacity: 17.5 m³ (22.9 cu yd)
  • Smart Safety and Performance Features
Standard Onboard Features to Help Ease Operation
John Deere wheel loader moving material at a construction site

When enabled through the monitor, standard onboard features help optimize operator focus and productivity. Features include rollover protection, downhill dump protection, hill hold, shuttle shifting, and more.

Improve Operator Awareness with Advanced Vision System
ADT AVS

Optional Advanced Vision System adds additional cameras to enhance operator situational awareness. The additional cameras provide a larger field of view for jobsite surroundings and articulation sensors provide dynamic panning capabilities.

A Quieter, Pressurized Cab with Adaptive Suspension
ADT Cab

The truck is equipped with a sealed, pressurized cab that helps minimize fatigue and helps operators stay comfortable and alert. Standard adaptive suspension system adjusts to the jobsite, stabilizing the ride and the cab.

Description: 310 P-Tier
Engine
ManufacturerJohn Deere
ModelPowerTech™ PSS 6090
Non-road emission standardsEPA Final Tier 4/EU Stage IV
ConfigurationInline 6 series turbocharger with exhaust gas recirculation (EGR) and selective catalytic reduction (SCR)
Valves per cylinder4
Displacement (cu in.)549 cu in.
Net power rpm rating (rpm)1900 rpm
Net power (ISO 9249) at rated rpm (hp)354 hp
Net peak torque rpm rating (rpm)1500 rpm
Net peak torque (ISO 9249) at rated rpm (lb-ft)1195 lb-ft
AspirationTurbocharged and charge air cooled
Fuel systemHigh-pressure common rail, with 10- and 2-micron filtration and water separator
Cold-start aid option and descriptionOptional ether start aid and block heater (110 and 240 volt, depending on location)
Cold-start aid factory-installed option and descriptionDiesel-fired coolant heater
Cooling
Engine coolingLiquid cooled with single-pass radiator, remote pressurized coolant tank, and charge air cooler
Powertrain
Transmission type8-speed forward, 4-speed reverse, countershaft/planetary type with integral retarder and torque proportioning differential
Retarder typeIntegral, gear dependent, hydrodynamic, oil-to-air cooled, variable, fully automatic
Differential typeTorque-proportioning, planetary-type, inter-axle differential lock (IDL) with multi-disc clutch
Output torque front (%)32 %
Output torque rear (%)68 %
Shift controlsFully automatic, electronically modulated PowerShift™, load-speed adaptive with gear-skip and gear-hunting protection
Transmission Operator InterfacePush-button F-N-R, selectable speed- and gear-range limits, selectable retarder aggressiveness, downhill-descent control, and gear-hold
Gear 1 forward speed (mph)3.7 mph
Gear 1 reverse speed (mph)3.7 mph
Gear 2 forward speed (mph)5.2 mph
Gear 2 reverse speed (mph)5.2 mph
Gear 3 forward speed (mph)6.8 mph
Gear 3 reverse speed (mph)6.8 mph
Gear 4 forward speed (mph)9.9 mph
Gear 4 reverse speed (mph)9.9 mph
Gear 5 forward speed (mph)14.3 mph
Gear 6 forward speed (mph)19.9 mph
Gear 7 forward speed (mph)28 mph
Gear 8 forward speed (mph)34.2 mph
Axles differentialHelical transfer gears, spiral bevel, hydraulically actuated multi-disc cross-axle differential lock (CDL)
Final drive typeMid-board-mounted planetary
Service brake typeDual-circuit, hydraulically actuated, wet multi-disc, outboard mounted
Parking brake typeSpring-applied hydraulically released, driveline-mounted, dry-disc with self-adjusting wear pad
Auxiliary brake typeFully automatic; transmission mounted, gear dependent; hydrodynamic retarder with selectable levels
Hydraulics
Hydraulics typePressure-compensated load-sensing (PCLS), variable-displacement axial-piston main pump
Secondary steering pump typeGround-driven gear pump with unloader valve
Dump cylinder hydraulics typeDual-acting, single-stage with heat-treated, chrome-plated, and polished cylinder rods; hardened steel replaceable bushings and pivot pins
Cycle time power down (sec.)7 seconds
Cycle time raise time (sec.)12 seconds
Electrical
Voltage (V)24 V
Number of batteries2
Voltage per battery (V)12 V
Battery capacity (CCA)1400 CCA
Alternator voltage (V)28 V
Alternator standard rating (amp)130 amp
Steering System
Type2 hydrostatically actuated, double-acting hydraulic cylinders; ground-driven secondary steering pump
Angle, side to side (degrees)45 degrees
Lock-to-lock turns (rotations)4.2
Suspension
FrontSemi-independent leading A-frame geometry with transverse link for lateral restraint and self-leveling oil-filled struts with inclusive nitrogen-charged accumulators
RearLoad-equalizing, pivoting walking beams with laminated suspension blocks, tri-link geometry and transverse links for lateral restraint
Dump body
TypeHigh-strength steel
Struck capacity (cu yd)17.9 cu yd
Capacity heaped at 2:1 ISO 6483 ratio (cu yd)22.9 cu yd
Capacity heaped at 2:1 ISO 6483 ratio with optional tailgate (cu yd)23.9 cu yd
Maximum dump angle (degrees)70 degrees
Heater typeBody ducted to accept optional exhaust heating
Tires and Wheels
Standard typeRadial earthmovers
Standard size23.5R25
Optional size750/65R25
Serviceability
Ground-level service fluid and filtersGround-level engine, transmission, and axle oil-level check and filter replacement; ground-level fueling and fuel-filter replacement
Ground-level service coolersSwing-out coolers for easy cleaning standard; reversing fans optional
Ground-level service fluid samplingFluid-sampling ports standard; quick-service ports optional
Fuel tank (gal.)131 gal.
Fuel tank (L)495.4 L
Diesel-exhaust fluid (DEF) tank (gal.)12.7 gal.
Diesel-exhaust fluid (DEF) tank (L)48.1 L
Engine oil capacity with filter (qt)36 qt
Engine coolant (gal.)13.7 gal.
Transmission fluid (gal.)15.9 gal.
Hydraulic reservoir (gal.)30 gal.
Front axle fluid, standard capacity (gal.)9.8 gal.
Mid axle fluid, standard capacity (gal.)9.8 gal.
Rear axle fluid, standard capacity (gal.)9.8 gal.
Operating Weights
Front, empty, with standard equipment (lb)27679 lb.
Front, loaded, with standard equipment (lb)33515 lb.
Middle, empty, with standard equipment (lb)11345 lb.
Middle, loaded, with standard equipment (lb)39430 lb.
Rear, empty, with standard equipment (lb)11345 lb.
Rear, loaded, with standard equipment (lb)39430 lb.
Total, empty, with standard equipment (lb)50369 lb.
Total, loaded, with standard equipment (lb)112374 lb.
Rated payload, empty, with standard equipment (lb)62005 lb.
Steel dump-body liner (lb)1905 lb.
Tailgate (lb)1411 lb.
750/65R25 tires (lb)1376 lb.
Operating Dimensions
Turning circle radius, inside (ft, in.)14 ft, in.
Turning circle radius, outside (ft, in.)26.33 ft, in.

Get A Quote